← Back to KB navigation
Equipment B-201A
FM fm_6
ISO 14224 mode STD Structural deficiency
Source OPC Ontology KB
Bending Deformation
B-201A · Fan / Blower
Related equipment → B-201A
0.75Source conf.
0.65Evidence conf.
STDISO 14224 mode
1Failure Mechanism
Function:实现设备功能
Failure cause:叶轮不平衡或对中不良；轴承损坏导致支撑失效；意外冲击或超负荷运行
2Source Basis (where this FM comes from)
OPC Ontology KBCSB Accident DBQuant benchmark
Source confidence 0.75: this FM is derived from the ontology KB and cross-validated by OPC Ontology KB·CSB Accident DB·Quant benchmark.
3Evidence Chain (supporting basis)
Evidence text：None
Evidence conf.：0.65 · Evidence source：engineering_estimate
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 1 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 580GB/T 7826-2012ISO 14224:2016SAE JA1011_202411
Standard clause references (15):
GB/T 7826-2012GB/T 27921-2011GB/T 44958-2024GB/T 4888-2008GB/T 29639-2020AQ/T 3034-2022API 581API 580API 754API 689API 755ISO 14224:2016ISO 20815:2018IEC 61511:2016ISO 31000:2018
6Derived Analysis (seeded from this FM)
8/4/4FMEA Sev/Occ/Det
0.34RBI λ
0.8Monitor pdet
4 月Insp. int.
Current tasks:每季度测量主轴跳动，当跳动超过0.05mm时安排校直或更换 | 每周监测振动，当1倍频幅值超过7.1mm/s时检查对中及平衡 | 每次停机检查轴承，发现损坏时立即修复并检查主轴
RCFA incident:B-201A 发生弯曲变形，严重程度 8，后果类型 Operational
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task沉降/变形观测 + 支撑/基础评估; 振动频谱分析 + 动平衡 + 激光对中, 状态监测趋势管理
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=deformation; vibration
Governing standardsAPI 579API 653API 670API 684ISO 10816
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。