← Back to KB navigation
Equipment BL-201A
FM fm_13
ISO 14224 mode LOO Low output
Source OPC Ontology KB
Insufficient Deaeration -> Oxygen Corrosion
BL-201A · Boiler
Related equipment → BL-201A
0.82Source conf.
0.80Evidence conf.
LOOISO 14224 mode
1Failure Mechanism
Function:去除溶解氧
Failure cause:除氧器温度或压力未达到设计值；排气阀故障导致氧气无法排出；进水含氧量过高或流量波动
Damage mechanism：除氧器功能失效 → 溶解氧超标 → 氧点蚀（oxygen pitting）
2Source Basis (where this FM comes from)
OPC Ontology KBCSB Accident DBQuant benchmark
Source confidence 0.82: this FM is derived from the ontology KB and cross-validated by OPC Ontology KB·CSB Accident DB·Quant benchmark.
3Evidence Chain (supporting basis)
Evidence text：None
Evidence conf.：0.8 · Evidence source：Industry consensus
Governing standards (evidence)：std:API-571 — API 571 — Damage Mechanisms Affecting Fixed Equipment · 损伤机理归类框架std:ASME-BPVC-I — ASME BPVC Section I — Rules for Construction of Power Boilers · 锅筒/受热面建造与检验规则（PG-19 等）std:DL-T-438 — DL/T 438 — 火力发电厂金属技术监督规程 · 金属技术监督（蠕变/氧化）
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 2 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 580GB/T 7826-2012ISO 14224:2016SAE JA1011_202411
Standard clause references (19):
GB/T 7826-2012GB/T 27921-2011GB/T 44958-2024GB/T 4888-2008GB/T 29639-2020AQ/T 3034-2022API 581API 580API 510API 571API 579-1/ASME FFS-1API 754API 576API 689API 755ISO 14224:2016ISO 20815:2018IEC 61511:2016ISO 31000:2018
6Derived Analysis (seeded from this FM)
8/4/3FMEA Sev/Occ/Det
0.34RBI λ
0.8Monitor pdet
4 月Insp. int.
Current tasks:每日在线溶解氧分析仪监测出水含氧量 | 每周检查除氧器排气口蒸汽量是否正常 | 每月检测给水铁离子浓度
RCFA incident:BL-201A 发生除氧不足→氧腐蚀，严重程度 8，后果类型 Safety/Environmental
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task温度/红外热成像监测, 超温报警与根因排查; 无损检测(UT/VT/MT/PT), 按 API 581 RBI 风险定级设定检验间隔
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=corrosion; overheat
Governing standardsAPI 530API 570API 571API 581厂家规范
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。