← Back to KB navigation
Equipment K-101
FM MECH-VALVE-STICKING
ISO 14224 mode
Source synthetic + standards-based engineering estimate derived from MCS mechanism substrate (API/ISO/GB/TSG framework); mechanism-derived, non-measured, transparently labeled seed
阀门卡涩/内漏
K-101 · Steam Turbine (Driver)
Related equipment → K-101
0.80Source conf.
—Evidence conf.
ISO 14224 mode
1Failure Mechanism
Function:None
Failure cause:阀门卡涩/内漏 驱动材料退化/功能失效
Damage mechanism：阀门卡涩/内漏 (MCS MECH-VALVE-STICKING)
2Source Basis (where this FM comes from)
synthetic + standards-based engineering estimate derived from MCS mechanism substrate (API/ISO/GB/TSG framework); mechanism-derived, non-measured, transparently labeled seed
Source confidence 0.80: this FM is derived from the ontology KB and cross-validated by synthetic + standards-based engineering estimate derived from MCS mechanism substrate (API/ISO/GB/TSG framework); mechanism-derived, non-measured, transparently labeled seed.
3Evidence Chain (supporting basis)
This FM has no offline curated evidence text; it is derived from the ontology KB and cross-validated by the listed standard clauses and related accident investigations.
Governing standards (evidence)：mcs:ISO 14224:2016 Annex B — Valve failure modes (fail to open/close, leakage) — ISO 14224:2016 Annex B — Valve failure modes (fail to open/close, leakage) · 机理级工程估计, 非实测; 来源 MCS 机理矩阵 MECH-VALVE-STICKING
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 1 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 612ISO 10437API 580ISO 14224:2016API RP 571API 684GB/T 28574
No separate clause reference.
6Derived Analysis (seeded from this FM)
6/3/3FMEA Sev/Occ/Det
0.19RBI λ
0.8Monitor pdet
12 月Insp. int.
Current tasks:行程测试 | 内漏检测 | 执行机构检查
RCFA incident:阀门卡涩/内漏导致设备功能退化/失效, 后果类型 Operational, 严重度 6
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task无损检测(UT/VT/MT/PT), 按 API 581 RBI 风险定级设定检验间隔; 标定/零点-跨度校验 + SIL Proof test + 阀门行程试验 + 变更管理; 泄漏监测 + 密封/填料定期更换, 螺栓热紧固
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=corrosion; instrument; seal_leak
Governing standardsAPI 510API 570API 571API 581API 682GB/T 21109IEC 61511ISA 84
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。