← Back to KB navigation
Equipment RP-101
FM capacity_loss
ISO 14224 mode
Source synthetic + standards-based engineering estimate (ISO 14224 / API 676 / API 674 framework)
排量不足/打量下降
RP-101 · 柱塞泵/隔膜泵/往复泵/计量泵/加药泵 (Reciprocating Positive Displacement Pump)
Related equipment → RP-101
0.80Source conf.
—Evidence conf.
ISO 14224 mode
1Failure Mechanism
Function:维持设计流量与排出压力
Failure cause:阀组/填料内漏或柱塞磨损致有效排量下降
Damage mechanism：内部回流增大使容积效率下降
2Source Basis (where this FM comes from)
synthetic + standards-based engineering estimate (ISO 14224 / API 676 / API 674 framework)
Source confidence 0.80: this FM is derived from the ontology KB and cross-validated by synthetic + standards-based engineering estimate (ISO 14224 / API 676 / API 674 framework).
3Evidence Chain (supporting basis)
This FM has no offline curated evidence text; it is derived from the ontology KB and cross-validated by the listed standard clauses and related accident investigations.
Governing standards (evidence)：std:API 674 — Positive Displacement Pumps - Reciprocating · 机理级工程估计, 非实测; 引用 governing standard 作为分类出处
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 3 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 674API 675ISO 14224:2016API 580GB/T 9234GB/T 7782SH/T 3141ISO 13372GB/T 6075SAE JA1011_202411
No separate clause reference.
6Derived Analysis (seeded from this FM)
5/4/4FMEA Sev/Occ/Det
0.3RBI λ
0.7Monitor pdet
6 月Insp. int.
Current tasks:监测排量与进出口压差 | 性能曲线对比 | 检查阀组与填料
RCFA incident:内漏与磨损使有效排量下降, 后果类型 Operational, 严重度 5
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task标定/零点-跨度校验 + SIL Proof test + 阀门行程试验 + 变更管理; 泄漏监测 + 密封/填料定期更换, 螺栓热紧固
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=instrument; seal_leak
Governing standardsAPI 510API 682GB/T 21109IEC 61511ISA 84
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。