conservator_breather_blockage
ISO 14224 mode Conservator / breather blockage Conservator / breather blockage
Source synthetic + standards-based engineering estimate (ISO 14224 / IEC 61800 / IEEE C57 框架归类)
Function:容纳油体积变化并隔离潮气
Failure cause:呼吸器硅胶饱和或管路堵塞,油柜不能正常呼吸,压力异常
Damage mechanism:呼吸器硅胶饱和或管路堵塞,油柜不能正常呼吸,压力异常甚至密封破裂
Source confidence 0.82: this FM is derived from the ontology KB and cross-validated by synthetic + standards-based engineering estimate (ISO 14224 / IEC 61800 / IEEE C57 框架归类).
std:IEC 60076 — Power transformers · 机理级工程估计,非实测;引用 governing standard 作为分类出处std:IEEE C57.12.00 — IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers · 机理级工程估计,非实测;引用 governing standard 作为分类出处This FM is recorded in 2 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
No separate clause reference.
Current tasks:呼吸器硅胶更换 | 油柜压力/油位检查
RCFA incident:储油柜/呼吸器堵塞:呼吸器硅胶饱和或管路堵塞,油柜不能正常呼吸,压力异常,后果类型 Operational,严重度 5
conservator_breather_blockage · Data from OPC KB and whitelisted public sources, compiled by Reliability AI for reliability demonstration only. Evidence ref codes are internal indices, not public DOIs.