FM Traceability Card · trace the source basis (tap links to trace back)
← Back to KB navigation
Equipment VFD-101 FM output_cable_insulation_degradation ISO 14224 mode Output cable insulation degradation Output cable insulation degradation Source synthetic + standards-based engineering estimate (ISO 14224 / IEC 61800 / IEEE C57 框架归类)
输出侧电缆/绕组绝缘因 dv/dt 退化
VFD-101 · Variable Frequency Drive (VFD)
Related equipment → VFD-101
0.82Source conf.
—Evidence conf.
Output cable insulation degradationISO 14224 mode
1Failure Mechanism

Function:传输 PWM 输出至电机

Failure cause:长电缆分布参数与 PWM 陡前沿 dv/dt 引起反射过电压，绝缘局部放电老化

Damage mechanism：长电缆分布参数与 PWM 陡前沿 dv/dt 引起反射过电压，绝缘局部放电（PD）老化、介损上升

2Source Basis (where this FM comes from)
synthetic + standards-based engineering estimate (ISO 14224 / IEC 61800 / IEEE C57 框架归类)

Source confidence 0.82: this FM is derived from the ontology KB and cross-validated by synthetic + standards-based engineering estimate (ISO 14224 / IEC 61800 / IEEE C57 框架归类).

3Evidence Chain (supporting basis)
This FM has no offline curated evidence text; it is derived from the ontology KB and cross-validated by the listed standard clauses and related accident investigations.
Governing standards (evidence)：
  • std:IEC 61800-3 — Adjustable speed electrical power drive systems — EMC requirements · 机理级工程估计，非实测；引用 governing standard 作为分类出处
  • std:IEC 60034 — Rotating electrical machines · 机理级工程估计，非实测；引用 governing standard 作为分类出处
4Related Real Accidents (traceable to accident cards)
NUREG-IN-94-51NUREG-LER-2006-004-FERMI2

This FM is recorded in 2 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.

5Applicable Standards & Clauses
IEC 61800-3IEC 60034

No separate clause reference.

6Derived Analysis (seeded from this FM)
6/3/3FMEA Sev/Occ/Det
0.05RBI λ
0.65Monitor pdet
12 月Insp. int.

Current tasks:局部放电监测 | 电缆绝缘诊断 | 输出电抗器配置

RCFA incident:输出侧电缆/绕组绝缘因 dv/dt 退化：长电缆分布参数与 PWM 陡前沿 dv/dt 引起反射过电压，绝缘局部放电老化，后果类型 Operational，严重度 6

7RCM Maintenance Decision (strategy landing)
PMScheduled (Proactive) Maintenance
Recommended task绝缘/电气试验 + 继电保护定值校核 + 操动机构特性测试
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=electrical
Governing standards
GB/T 14285IEC 60034IEEE C57
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。
FM output_cable_insulation_degradation · Data from OPC KB and whitelisted public sources, compiled by Reliability AI for reliability demonstration only. Evidence ref codes are internal indices, not public DOIs.