← Back to KB navigation
Equipment AGI-101
FM agi_seal_flush_fail
ISO 14224 mode M M
Source engineering_estimate
密封冲洗失效
AGI-101 · Agitator
Related equipment → AGI-101
0.82Source conf.
—Evidence conf.
MISO 14224 mode
1Failure Mechanism
Function:维持密封面清洁
Failure cause:冲洗液中断/堵塞致密封面干磨失效
Damage mechanism：冲洗液中断致密封干磨
2Source Basis (where this FM comes from)
engineering_estimate
Source confidence 0.82: this FM is derived from the ontology KB and cross-validated by engineering_estimate.
3Evidence Chain (supporting basis)
This FM has no offline curated evidence text; it is derived from the ontology KB and cross-validated by the listed standard clauses and related accident investigations.
Governing standards (evidence)：std:API 682 — Pumps — Shaft Sealing Systems for Centrifugal and Rotary Pumps · 机理级工程估计，非实测；引用 governing standard 作为分类出处
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 1 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 682
No separate clause reference.
6Derived Analysis (seeded from this FM)
8/3/5FMEA Sev/Occ/Det
0.04RBI λ
0.75Monitor pdet
6 月Insp. int.
Current tasks:冲洗管线检查
RCFA incident:密封冲洗失效：冲洗液中断/堵塞致密封面干磨失效，后果类型 Safety/Operational，严重度 8
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task按压差/效率监测设定清洗周期 + 过滤/防堵维护; 泄漏监测 + 密封/填料定期更换, 螺栓热紧固
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=fouling; seal_leak
Governing standardsAPI 510API 571API 682厂家规范
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。