← Back to KB navigation
Equipment GB-101
FM gb_bearing_outer_race_defect
ISO 14224 mode Gearbox bearing outer race Gearbox bearing outer race
Source synthetic + standards-based engineering estimate (ISO 14224 / API / IEC 61511 框架归类)
齿轮箱轴承外圈缺陷
GB-101 · Gearbox (Speed Reducer/Increaser)
Related equipment → GB-101
0.82Source conf.
—Evidence conf.
Gearbox bearing outer raceISO 14224 mode
1Failure Mechanism
Function:支撑齿轮轴
Failure cause:外圈滚道疲劳剥落
Damage mechanism：齿轮箱轴承外圈在壳体配合下疲劳剥落
2Source Basis (where this FM comes from)
synthetic + standards-based engineering estimate (ISO 14224 / API / IEC 61511 框架归类)
Source confidence 0.82: this FM is derived from the ontology KB and cross-validated by synthetic + standards-based engineering estimate (ISO 14224 / API / IEC 61511 框架归类).
3Evidence Chain (supporting basis)
This FM has no offline curated evidence text; it is derived from the ontology KB and cross-validated by the listed standard clauses and related accident investigations.
Governing standards (evidence)：std:API 677 — General-purpose Gear Units · 机理级工程估计，非实测；引用 governing standard 作为分类出处
4Related Real Accidents (traceable to accident cards)
This FM is recorded in 2 real accident investigation(s); tap the report no. to open the corresponding accident lesson card.
5Applicable Standards & Clauses
API 677ISO 6336AGMA 2001ISO 14224:2016GB/T 3480GB/T 6075ISO 13372API 580GB/T 7826-2012SAE JA1011_202411
No separate clause reference.
6Derived Analysis (seeded from this FM)
6/3/4FMEA Sev/Occ/Det
0.15RBI λ
0.9Monitor pdet
6 月Insp. int.
Current tasks:振动监测 | 温度趋势
RCFA incident:齿轮箱轴承外圈缺陷：外圈滚道疲劳剥落，后果类型 Operational，严重度 6
7RCM Maintenance Decision (strategy landing)
CBMOn-Condition Maintenance
Recommended task无损检测(UT/MT/PT) 监测裂纹萌生, 关键转动件定时拆检; 温度/红外热成像监测, 超温报警与根因排查; 振动频谱分析 + 动平衡 + 激光对中, 状态监测趋势管理
Suggested intervalHigh risk 1-3 mo / Medium 6-12 mo / Low risk at turnaround (by API 581 RBI risk ranking)
Decision basis机理类别=fatigue; overheat; vibration
Governing standardsAPI 530API 579API 612API 670API 684ASME VIIIISO 10816厂家规范
⚠ This decision is engineering-inferred by RCM logic from the damage mechanism / root cause / failure cause — it is not derived from measured site history. Confirm with the equipment owner and process before execution.
⚠ 本卡技术正文（功能 / 致因 / 损伤机理 / RCFA 叙事）保留中文原文——依可信 AI 红线，自由技术文本不自动机翻、不编造英文译文。UI、设备类型、FM 名、ISO 码、标准号均为英文。